Add efficiency and comfort to your work with options.

     Anti slip valve
     •Further improves traction in difficult and slippery conditions
     •Less need for special tyres or snow chains
     Anti slip valve positively diverts oil flow between the hydraulic drive motors,

     forcing each wheel to turn at practically the same pace. This improves

     traction especially in slippery conditions and difficult terrains.
     Anti slip valve requires the electric drive release on the machine, in order

     to release the diff lock when necessary.

    Work light kit
     •More working hours
     •Efficient working also in the dark
     The extra work lights allows you to use the machine in the dark also. The kit

     consists of three lights: two to the front, one to the rear. The lights are

     mounted on the safety frame so that they give best possible lighting to the

     work area, and are also well protected under the canopy.

      Road traffic light kit
     •Enables road traffic registration in certain countries
     The kit consists of headlights, blinkers, beacon, reflectors and warning

     triangle in the rear. In certain countries this equipment enables road

     traffic registration – requirements vary in different countries, please

     consult your local AVANT distributor.

     Cab L
     •More operator comfort
     AVANT cab L is an excellent and economical choice when the operator

     wants to have protection against rain, wind and snowfall. It improves operator

     comfort and working conditions considerably.
     The cab mounts on the standard 600 series ROPS frame, which means safety

     is guaranteed. It consists of windscreen (equipped with wiper), right side

     window and rear window.

     Cab LX
     •Economical cab with heater, for all four seasons
     •Easy to take off for summer
     AVANT cab LX is the right solution when a cab with heater is required. The cab

     LX has all the features of cab L and, in addition, is equipped with a door and

     a heater, which further improve operator comfort in harsh weather conditions.

     And for warmer seasons the door and windows can easily be removed if necessary.
     The optional road traffic light kit (headlight, blinker, reflector + beacon) can be

     installed both on cab L and LX.

     Cab DLX
     •Top class comfort for professional use
     The cab DLX is and independent ROPS/FOPS cab that mounts on the machine

     instead of the standard ROPS frame. It is equipped with a heater, noise isolating

     interior and fabric seat, radio and cab air filter. The road light kit (headlights,

     blinkers, reflectors + beacon) and work light kit is standard feature as well.

     This allows road traffic registration in certain countries, please consult your

     local AVANT distributor.
     AVANT cab DLX is spacious, fully equipped and well-lighted and stands

     comparison with any cab of similar size on the market.

     Auxiliary hydraulics outlet in the rear
     Rear auxiliary hydraulics outlet enables operation of some hydraulically operated

     attachments in the rear, like the hydraulic tipping trailers, horse arena harrow,

     hydraulic sand spreader etc.
     Both single acting and double acting outlets are available.

     Hydraulic lifting device in the rear
     • Same quick attach plate than in front
     • Can use for example
     - Sand spreader
     - Rotary hoe/harrow
     - Trailer coupling
     • Available for 600 series and to 528
     • Price includes the rear auxiliary hydraulics
     • Float position is standard equipment

     Rear side weights
     •More lift capacity without increasing the width or length of the machine
     Available for models 528, 630, 635, 745 and 750 the rear side weights come as pair,

     one for each side of the machine. Their weight is 180 kg (90 kg each), and the

     weights increase the practical lift capacity so that with 600 series you can handle

     as much as 1000 kg loads with 600 series and 1200 kg loads with 700 series.
     Rear side weights mount behind the rear wheels and they don’t make the machine

     wider or longer when the machine is equipped with 26*12.00-12 (Avant 600-series

     and 745) or 29*12,50-15 (Avant 750) wheels.

     Extra counterweights
     The 36 kg weights keep the loader more stable when there is a

     heavy load in the bucket.

     They are easy to mount in the rear and remove when necessary.

     Trailer coupling
     Trailer coupling is a standard 50 mm ball coupling. A coupling with pin

     (for tractor type trailers) also available.

     Heavy duty wheels
     The harder rubber compound, bigger load capacity and stronger profile make the

     heavy duty wheels the right choice especially for construction sites. Wheel size is

     320/60-12, which is the same as 26*12.00-12.

    Loading ramps
     •Lightweight aluminium ramps, easy to handle and to transport
     By using the loading ramps it is easy to drive your AVANT on the trailer or van.

     The lightweight aluminium ramps are easy to handle and they stay clean thanks to

     the open grid design.

     Multi connector

     Connect all hoses of the attachment - two or three couplings, depending
     on attachment - with one movement in an effortless and clean fashion.
     The multi connector system has all hydraulic hoses/couplings of the
     attachment collected into one block which mounts on the counterpart
     on the loader boom. This multi connector replaces the standard auxiliary
     hydraulics outlet on the boom.
     Connecting and disconnecting is extremely easy and requires practically
     no force. The two parts are simply placed close to each other by hand
     and then connected by turning the lever on the side of the connector.
     The hydraulic quick couplers are flat face connectors, so no oil will leak
     out during connecting and disconnecting.
     The system is available only to the front auxiliary hydraulics.

     Hydraulic quick attachment coupling plate

     The hydraulic quick attachment plate enables quick attachment changes
     and eases the changing operation.

     The release and locking mechanism is operated from the loader’s
     cockpit, by using the auxiliary hydraulics lever.

     Two double acting hydraulic outlets on front

     Enables the use of special attachments or attachment combinations. For
     example tilt adapter and 4 in 1 bucket can be used simultaneously with
     this option.
     The driver can choose between outlet 1 or outlet 2 by using a toggle
     switch on the loaders dashboard.
     Please note that simultaneous use of the both outlets is not possible.
     Also note that only one free return line is available on the system.