With Leguan The Sky's The Limit!

    Leguan 80SX is destined for both indoor and outdoor use. Thanks to the

    continuous 4 wheel drive the all terrain capabilities of the Leguan 80SX

    are excellent. The 80SX is equipped with four hydraulic outriggers which

    means that if e.g. a new building is in a phase where the walls and roof

    are ready but the floor is still sand, it is possible to work there already at

    this stage with the Leguan. Unlike most battery powered scissor lifts the

    Leguan SX80 can work on sites with sand ground.
    The compact dimensions (width 1.00 m x length 2.80 m x height 2.05 m in

    transport position) allow indoor use also.
    Leguan SX80 has hydraulic four wheel skid steer drive with four hydraulic

    motors mounted directly on the wheel hubs. As the hydraulic motors are

    connected in series the SX80 has good grip on uneven surfaces even if one

    wheel lifts off the ground. Thanks to the four hydraulically operated

    pressure sensitive outriggers the Leguan 80SX can be set up and operated

    also on uneven grounds. Leguan 80SX can easily cope with e.g. ramps and

    uneven pieces of land.
 

    TECHNICAL SPECIFICATION:
    Type: LEGUAN 80SX 4WD
    Safe working load: 225 kg
    Number of persons+additional load: 2 persons + 65 kg
    Max. working height: 8.0 m
    Max. platform height: 6.0 m
    Max. horizontal force: 400 N
    Max. wind speed: 12.5 m/s
    Min. operating temperature: - 25º C

    Outrigger spread:
    - length 2,3 m
    - width 1,3 m

    Transport dimensions:
    - length 2,80 m
    - width 1,00 m
    - height 2,05 m

    Platform dimensions:
    width 0,92 m x length 2,2 m (length 3,4 m with extension)

    Weight (depending on equipment): ca. 1.500 kg

    Powered by:
    Electric motor 230V 2,2 kW / 16A, or Honda GX390 13 hp petrol engine, or both.