|
NEW ATTACHMENTS
Horse arena harrow The horse arena harrow is intended for leveling and loosening horse arena riding surfaces. The harrow has two spring loaded tine rows which will loosen the surface, a leveler that will make the surface completely even and a tilling roller that will compact the ground, leaving a great looking finish to the surface. The harrow will not disturb the lower levels (understructure) of the riding surface.
The horse arena harrow features:
- A clearing shovel which will level the sides of the riding arena.
- A tilling roller that will smoothen the harrowed ground leaving a great looking finish.
- A large wheel that protects the walls of riding arena in case the harrow hits the wall.
- Hydraulically operated support wheels for towing the harrow outside riding arena. More info in attachments page. NEW Avant Hydraulic Breaker AVANT breakers are specially designed for use with AVANT loaders. There is three different models suitable for all 500 and 600 Series models. An AVANT loader coupled with the breaker is an extremely efficient tool in demolition and refurbishing operations: do the demolition with the breaker, and take the debris away with the AVANT using a bucket
– use of machine is very fast and effective, and you can go almost anywhere with this unit. 
New Collecting mower With the new AVANT collecting mower you can easily do the mowing and collect the clippings. Thanks to its excellent suction power collecting of leaves from the lawns is also possible.
The mulching blades of the mower crush the grass clippings, leaves etc. into a very fine material which then moves to the collector and forms a tight and compact package. The waste is ideal material for compost also. Collector capacity is as big as 210 litres, which enables cutting of larger areas as well. Emptying of the collector is very easy: open the lid, lift the mower up from the ground and tilt it forward so that the waste comes out.
NEW MACHINES
The New AVANT 500 series
AVANT new 500 series features
1. Lift capacity
• Maximum lift capacity is 25 % more than on old 500 series
• Integrated 170 kg cast iron rear weight is standard like on 600 series
2. Lift height
• Max. lifting height with telescopic boom to pivot point is 2790 mm – 400 mm more than on old 500 series
• Enough lift height to load into a truck
3. Modern boom construction
• Off centre boom construction – same as on 600 series
• Excellent visibility to the attachments
• Increased work efficiency
• Improved safety
• Big breakout forces in all bucket angles
4. Big bucket breakout force
• Thanks to the linkage system on bucket tilting – same as on 600 series – bucket breakout force is 90 % better than on the old 500 series, and breakout force is very even throughout the tilting range
5. Self leveling
• Hydraulic self leveling with teleboom
• Thanks to self leveling the use of the machine will be easier in multiple tasks
• Heavy loads on a pallet can be lifted and loaded much easier than before
7. Ergonomic operator area
• Ample space even for taller operators
• Modern instrument panel like on 600 series
• Excellent visibility all-round
• Plexiglass tinted canopy as standard
• Work lights as standard
8. ROPS
• 4-post ROPS as standard
• total machine height 1980 mm with ROPS – thanks to lower ROPS and 23*10.50-12 wheels
• Will also protect the operator from behind
• Protection from rain and sun with the tinted plexiglass canopy
• ROPS is officially tested and CE approved by the MTT Agricultural Engineering Research (VAKOLA) in Finland, which is an EC Notified Body
• FOPS canopy available as option
9. Cab
• Same cab as for 600 series available as option
New 500 series video 


|